Sony CDXGT920U Car Stereo Manual

The Sony CDXGT920U is a high-performance car stereo featuring a CD/MP3/WMA/AAC player, AM/FM tuner with 18 FM/12 AM presets, front auxiliary input, USB direct control for iPod/iPhone, Bluetooth connectivity for hands-free calling and audio streaming, 52W x 4 high power output, customizable illumination (red/white), detachable faceplate security, and advanced sound settings including EQ7, DSO, and Loudness. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Playing Media 8. Bluetooth Features 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Main unit with detachable faceplate, Remote Control, Wiring harness, Mounting sleeve, USB extension cable, User manual.

FeatureDescription
CD/MP3/WMA/AAC PlaybackPlays standard CDs and compressed audio files
AM/FM Tuner18 FM and 12 AM station presets
Front AUX Input3.5mm jack for external audio devices
USB Direct ControlConnect and control iPod/iPhone directly
BluetoothHands-free calling and audio streaming
Power Output52W x 4 channels (max)
Customizable IlluminationRed or white button illumination
Detachable FaceplateSecurity feature to prevent theft
Sound SettingsEQ7, DSO (Dynamic Soundstage Organizer), Loudness
Remote ControlIncluded for convenient operation

Installation

Unpack and inspect all contents. Ensure you have the proper tools.

  1. Disconnect the vehicle's negative battery terminal.
  2. Remove the existing stereo (if any) using appropriate removal tools.
  3. Connect the wiring harness: Match wire colors (red=ignition, yellow=battery, black=ground, etc.). Use crimp connectors or solder for secure connections.
  4. Connect antenna cable and any additional cables (USB, Bluetooth microphone).
  5. Slide the unit into the mounting sleeve and secure it in the dashboard.
  6. Reconnect the negative battery terminal.

WARNING! Installation in a vehicle requires knowledge of automotive electrical systems. Incorrect installation can cause damage to the unit or vehicle. If unsure, consult a professional installer.

First-Time Setup

After installation, power on the unit and configure initial settings.

  1. Set the clock: Press and hold the SETUP button, then use the rotary knob to set the time.
  2. Program radio presets: Tune to a desired station, press and hold a preset button (1-6) to store it.
  3. Pair Bluetooth device: Navigate to the Bluetooth menu, select "Pairing," and follow on-screen prompts to connect your phone.
  4. Adjust sound settings: Use the AUDIO menu to set EQ, balance, fader, and loudness to your preference.
  5. Select illumination color: In the SETUP menu, choose between red or white for button backlighting.

CAUTION! Perform setup only when the vehicle is parked in a safe location to avoid distraction.

Specifications

Controls and Settings

Front Panel: POWER/VOLUME knob, SOURCE button, AUDIO button, SETUP button, EJECT, Number buttons, Folder/Track buttons.

Remote: POWER, VOLUME, MUTE, SOURCE, Number buttons, Play/Pause, Track Up/Down.

Source Selection: CD, Tuner, AUX, USB, BT AUDIO. Audio Settings: EQ7 (Preset or Custom), DSO (On/Off), Loudness (On/Off), Balance/Fader, Subwoofer Level. Setup Menu: Clock, Illumination Color, Beep Tone, Bluetooth Settings, Reset.

Connecting Devices

AUX Input: Use 3.5mm cable from device's headphone jack to front AUX port. USB: Connect iPod/iPhone or USB flash drive using the extension cable. Bluetooth: Pair compatible phone for calls and music.

  1. Ensure the unit is on and vehicle is in park.
  2. For USB, connect the device directly. The unit may switch to USB mode automatically.
  3. For AUX, connect the cable and press SOURCE to select "AUX."
  4. For Bluetooth, initiate pairing from the unit's menu or your phone's Bluetooth settings.

Tip: Use high-quality cables for best audio performance. Ensure USB devices are formatted in FAT32.

Playing Media

Supports Audio CDs, MP3/WMA/AAC CDs, USB drives, and Bluetooth audio.

  1. Insert disc: Press EJECT, load CD label-side up.
  2. Play: Press PLAY or it may start automatically. Use Folder/Track buttons to navigate.
  3. USB Playback: Connect device, select USB source. Navigate folders using Number buttons or rotary knob.
  4. MP3/WMA/AAC Playback: Supports ID3 tag display for artist and song title.
  5. Random/Repeat: Press RPT or RDM during playback to activate modes.
  6. Scan: Press and hold Track Up/Down to scan through tracks.

WARNING! Do not use damaged or irregularly shaped discs. Avoid using the unit in extreme temperatures to protect the laser mechanism.

Bluetooth Features

Hands-Free Calling: Pair your phone to make and receive calls using the built-in microphone. Audio Streaming: Stream music from your phone wirelessly. Phonebook Access: Supports downloading of contacts (depending on phone model).

To make a call: Use the remote or unit buttons to access the call list or dial using voice commands (if supported by phone). To adjust call volume: Use the volume knob during a call.

Care & Maintenance

Use a soft, dry cloth to clean the faceplate and unit. For stubborn marks, lightly dampen the cloth with water. Do not use solvents or abrasive cleaners.

CAUTION! Always detach the faceplate before cleaning. Do not apply excessive pressure to the LCD screen or buttons. Store the detached faceplate in its protective case.

Regulatory Information

FCC Compliance: This device complies with Part 15 of the FCC Rules. Operation is subject to interference that may cause undesired operation. Bluetooth is a trademark of Bluetooth SIG, Inc. iPod and iPhone are trademarks of Apple Inc. For support, visit www.sony.com/electronics/support or contact Sony customer service at 1-800-222-7669.

Troubleshooting

SymptomPossible CauseCorrective Action
Unit does not power onPower/Blaupunkt wiringCheck fuse, ignition/battery/ground connections. Ensure wiring harness is secure.
No sound from speakersSpeaker wiring/SourceCheck speaker connections. Ensure source is playing and volume is up. Verify balance/fader settings.
Bluetooth not connectingPairing/CompatibilityDelete old pairing from phone and unit. Re-pair. Ensure phone Bluetooth is on and compatible.
CD/USB not recognizedDisc/FormatCheck for disc damage or dirt. Ensure USB drive is FAT32 formatted and contains supported audio files.
Poor radio receptionAntennaEnsure antenna cable is fully connected. Extend antenna fully. Check for local interference.

Reset: In SETUP menu, select "Initialize" or disconnect the battery for 1 minute to reset all settings.

Service: 1-800-222-7669; www.sony.com/electronics/support

Sony CDXGT920U Car Stereo Manual © - All Rights Reserved 2025