Sony FMP-X1 Car Stereo Manual

The Sony FMP-X1 is an advanced in-car multimedia receiver featuring a high-resolution touchscreen display, AM/FM radio with RDS, built-in Bluetooth for hands-free calling and audio streaming, USB and auxiliary inputs, compatibility with various audio formats, steering wheel control interface, customizable audio settings (EQ, balance, fader), and support for rear-view camera input. Designed for 12V DC vehicle electrical systems. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: Touchscreen Display, Main Unit, Remote Control (if applicable), Wiring Harness, Mounting Sleeve, USB Extension Cable, Microphone for Hands-free.

Installation

Unpack and inspect contents. Ensure vehicle is parked with ignition off and battery disconnected.

1. Remove existing stereo: Use appropriate removal tools for your vehicle.
2. Connect wiring harness: Match wire colors (Red to ignition/accessory, Yellow to constant 12V, Black to ground). Connect speaker wires.
3. Connect antenna adapter: Plug vehicle antenna cable into provided adapter, then into unit.
4. Connect other inputs: Plug in USB extension, microphone, steering wheel control interface (if used), and rear-view camera (if used).
5. Secure unit: Slide into mounting sleeve and secure with provided brackets.
6. Reconnect vehicle battery and test functions.

WARNING! Installation requires knowledge of vehicle electrical systems. Incorrect wiring can cause damage or fire. Consult a professional if unsure.

First-Time Setup

Turn on ignition to power the unit. Follow initial setup prompts on screen.

1. Set Language: Select preferred language from the SETTINGS menu.
2. Pair Bluetooth Phone: Go to Bluetooth settings, search for "Sony FMP-X1" from your phone, and enter PIN if prompted (default: 0000).
3. Tune Radio: Press SOURCE to select Tuner, then use auto-scan or manual tuning to save stations.
4. Adjust Audio Settings: Access Audio menu to set Equalizer (EQ), Balance, Fader, and Loudness.
5. Configure Clock: Set the correct time in the System Settings.

CAUTION! Perform setup only when the vehicle is parked in a safe location. Do not operate the touchscreen while driving.

Specifications

• Display: 6.2-inch WVGA Capacitive Touchscreen.
• Radio: AM/FM with 30 station presets (18 FM, 12 AM).
• Bluetooth: Version 4.2, profiles HFP, A2DP, AVRCP.
• Audio Formats: MP3, WMA, AAC, WAV, FLAC.
• Video Playback: Not supported (Audio-only unit).
• Power Output: 20W x 4 channels (MOSFET).
• Pre-out Voltage:2V RCA preamp outputs.
• Power Supply: 12V DC, negative ground.
• Operating Temp: -20°C to 60°C (-4°F to 140°F).

Controls and Settings

Access menus via touchscreen or physical buttons (if present).

Touchscreen Interface: Home screen with source icons, Settings gear icon, Audio adjustment icon.

Physical Buttons (if applicable): POWER/VOLUME knob, SOURCE button, hardware buttons for Home/Menu/Back.

Audio Settings: Equalizer (Flat, Powerful, Vocal, Custom), Bass/Mid/Treble adjustment, Balance/Fader, Loudness, Subwoofer Level control (if connected).

System Settings: Display brightness/color, Clock setting, Bluetooth management, Steering wheel control learning, Beep tone on/off, Factory Reset.

Connecting Devices

USB: Connect flash drive or compatible device to USB port. AUX: Use 3.5mm cable from device to AUX IN jack. Bluetooth: Pair phone as described in setup.

1. Ensure the unit is on and vehicle is in Park (for safety).
2. For USB/AUX: Connect cable, then press SOURCE to select "USB" or "AUX".
3. For iPhone/iPod: Use genuine Apple USB cable for best compatibility and charging.
4. For Android: USB connection may support audio playback (MTP/PTP modes).

Tip: Use high-quality USB drives formatted as FAT32 for best compatibility. Avoid using the USB port for charging high-power tablets.

Media Playback

Supports audio files from USB, Bluetooth, and Auxiliary input.

1. Select Source: Touch the source icon (USB, BT Audio, AUX) on the home screen.
2. Browse Files: On USB, navigate through folders using the folder view or list view.
3. Playback Controls: On-screen buttons for Play/Pause, Next/Previous Track, and Fast Forward/Rewind (touch and hold).
4. Repeat/Shuffle: Access playback mode menu to set Repeat (One/All/Folder) or Shuffle.
5. Sound Adjustment: Adjust EQ and other audio settings during playback.

WARNING! Do not insert or remove USB drives while the vehicle is in motion. Ensure the drive is securely connected.

Bluetooth & Phone Features

Hands-free Calling: Answer/end calls with on-screen buttons or steering wheel controls. Reject call by holding the volume knob. Audio Streaming: Stream music from phone apps like Spotify or Apple Music.

Phonebook Access: Sync contacts automatically after pairing.

Call History: View recent missed, received, and dialed calls.

Voice Dialing: Activate phone's voice assistant (Siri/Google Assistant) via a long press of the phone button (if mapped).

Care & Maintenance

Turn off the unit and disconnect the vehicle battery before any cleaning. Clean the touchscreen with a soft, dry microfiber cloth. For stubborn smudges, lightly dampen the cloth with water. Do not use alcohol, ammonia, or abrasive cleaners.

CAUTION! Never spray liquids directly onto the screen or unit. Avoid extreme heat and direct sunlight for prolonged periods to protect the display.

Regulatory Information

FCC Part 15: This device complies with part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. ICES-003: Complies with Canadian ICES-003. Bluetooth®: The Bluetooth® word mark and logos are owned by Bluetooth SIG, Inc. For support, visit www.sony.com/electronics/support or contact Sony customer service at 1-800-222-7669.

Troubleshooting

Reset: Settings > System > Factory Reset (Note: This will erase all presets and paired devices).

Service: 1-800-222-7669; www.sony.com/electronics/support