Sony MZ-E600 Car Stereo Manual

The Sony MZ-E600 is a high-quality car stereo system designed for superior in-vehicle audio performance. It features AM/FM radio with preset stations, CD player compatibility, auxiliary input, USB connectivity for digital media playback, built-in amplifier, equalizer settings, and steering wheel control compatibility. Below are key sections covering safety, features, installation, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Playing Media 8. Audio Settings 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Main unit with display, Remote Control (optional), Wiring harness, Antenna connector, USB port, AUX IN jack, CD slot.

Feature	Description
AM/FM Tuner	With 30 preset stations (18 FM, 12 AM)
CD Player	Plays CD, CD-R, CD-RW formats
USB Port	For playback of MP3/WMA files from USB drives
AUX IN Jack	3.5mm input for external audio devices
Preamp Outputs	Front, Rear, and Subwoofer RCA outputs
Steering Wheel Control	Compatible with SWC interfaces (adapter required)
Power/Antenna Output	12V DC power and automatic antenna trigger
Display	Multi-color LCD with dimmer control
EQ Presets	Rock, Pop, Jazz, Classic, Flat, User
Security	Detachable faceplate

Installation

Unpack and verify all components. Ensure vehicle is off and battery disconnected.

Remove existing stereo: Use removal keys or tools specific to your vehicle.
Connect wiring harness: Match colors (Red: Ignition, Yellow: Battery, Black: Ground).
Connect antenna: Plug vehicle antenna cable into rear port.
Connect speakers: Ensure correct polarity (positive/negative).
Mount unit: Slide into dashboard opening and secure with brackets.
Reconnect battery and test.

WARNING! Disconnect vehicle battery before installation to prevent electrical shorts or damage.

First-Time Setup

After installation, power on the unit and configure basic settings.

Set clock: Press and hold SETUP, navigate to CLOCK, set time.
Program radio stations: Tune to desired station, press and hold a preset button (1-6) for 2 seconds.
Adjust display: Use DIMMER setting in SETUP menu for day/night brightness.
Set audio preferences: Configure bass, treble, balance, and fader.

CAUTION! Ensure all wiring is insulated and secured to avoid rattles or shorts.

Specifications

Power Output: 50W x 4 channels (max).
Tuner: AM/FM with seek and scan.
CD Compatibility: CD-DA, CD-R, CD-RW.
USB Support: MP3, WMA up to 320kbps.
Frequency Response: 20Hz - 20kHz.
Signal-to-Noise Ratio: >80dB.
Power Supply: 12V DC, negative ground.
Dimensions: DIN size (178mm x 50mm).
Operating Temp: -20°C to +60°C.

Controls and Settings

Front Panel: POWER/VOLUME knob, SOURCE button, EJECT, MENU/SETUP.

Remote (if included): POWER, Numeric buttons, SOURCE, VOLUME UP/DOWN, MUTE, SEEK, PLAY/PAUSE.

Settings Menu: Accessed via SETUP button. Options include CLOCK, DIMMER, BEEP ON/OFF, LANGUAGE, RESET. Audio Settings: BASS, TREBLE, BALANCE (Left/Right), FADER (Front/Rear), LOUDNESS (On/Off), EQ PRESETS. Radio: AUTO STORE, MANUAL TUNE, PRESET MODE.

Connecting Devices

USB: Connect flash drive for music playback. AUX: Use 3.5mm cable for smartphone/MP3 player. Preamp Outputs: Connect to external amplifiers.

Ensure unit is off before connecting devices.
Insert USB drive fully into port.
Plug AUX cable into front panel jack.
Select corresponding source (USB or AUX).

Tip: For best USB compatibility, format drive as FAT32 and organize files in folders.

Playing Media

Supports CD, USB, and AUX input playback.

Insert CD: Press EJECT, place disc label-up, close manually.
Play: Press PLAY or select track with numeric buttons.
Skip: Use SEEK or TRACK UP/DOWN buttons.
Repeat/Random: Press RPT or RDM during playback.
USB Playback: Navigate folders using LEFT/RIGHT buttons.
AUX Playback: Control volume from source device and stereo.

WARNING! Do not insert damaged or irregular CDs. Avoid using while driving on rough roads.

Audio Settings

Equalizer: Select from presets (ROCK, POP, JAZZ, etc.) or customize USER setting. Loudness: Boosts bass at low volumes. Balance/Fader: Adjust sound distribution.

Care & Maintenance

Keep unit clean and dry. Use soft, dry cloth for display and faceplate. Do not use solvents.

CAUTION! Remove faceplate when parking in public to deter theft. Store in protective case.

Regulatory Information

FCC Part 15 compliant. This device complies with Industry Canada license-exempt RSS standard(s). Copyright © Sony Corporation. For support, visit www.sony.com/audio or contact Sony Customer Service at 1-800-222-7669.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Wiring/fuse	Check battery and ignition connections; inspect fuse in wiring harness.
No sound from speakers	Speaker wiring	Verify speaker connections and polarity; check balance/fader settings.
CD won't play	Disc format/damage	Ensure disc is compatible (CD-DA); clean disc; try another CD.
USB not recognized	Format/capacity	Reformat drive as FAT32; use USB 2.0 drive under 32GB.
Poor radio reception	Antenna connection	Ensure antenna cable is fully inserted; check antenna condition.

Reset: Press SETUP, navigate to RESET, confirm to restore factory defaults.

Service: 1-800-222-7669; www.sony.com/audio