Sony TC-TX595 Car Stereo Manual

The Sony TC-TX595 is an in-dash car stereo featuring AM/FM radio with 30 station presets, auto-reverse cassette deck with Dolby B noise reduction, CD changer control capability, high-power amplifier, detachable faceplate security, and bass/treble controls. It includes a wired remote control input and is designed for standard DIN installation in most vehicles. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Playing Cassette Tapes 8. Security Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Main unit with cassette deck, Detachable Faceplate, Wired Remote Control, Power/Speaker wiring harness, Mounting sleeve.

Feature	Description
AM/FM Tuner	30 station presets (18 FM, 12 AM)
Auto-Reverse Cassette	Plays both sides automatically; Dolby B NR
CD Changer Control	Compatible with Sony CDX- series changers
High Power Output	50W x 4 max power
Detachable Faceplate	Security feature to prevent theft
Bass/Treble Controls	Adjustable sound tone
Loudness	Enhances low/high frequencies at low volume
Fader/Balance	Adjusts front/rear and left/right speaker balance
Wired Remote Input	For optional remote control
Clock/Timer	Built-in clock with sleep timer function

Installation

Unpack and inspect contents. Ensure vehicle battery is disconnected before starting.

Remove existing stereo: Use DIN tools to release old unit.
Connect wiring harness: Match colors (Red to ignition, Yellow to battery, Black to ground).
Connect speakers: Match positive/negative wires to harness.
Insert mounting sleeve: Secure into dashboard opening.
Slide unit into sleeve: Connect antenna and test before final securing.
Attach faceplate: Press until it clicks into place.

WARNING! Disconnect vehicle battery to prevent short circuits. Ensure all connections are secure and insulated.

First-Time Setup

Reconnect battery; power on unit; follow initial setup.

Set the clock: Press CLOCK button, use TUNE/SEEK to set time.
Program radio stations: Tune to desired station, press and hold a preset button (1-6).
Adjust sound settings: Use BASS/TREBLE, FADER/BALANCE for preferred audio.
Test cassette function: Insert a tape to ensure auto-reverse works.

CAUTION! Do not operate while driving. Park vehicle for initial setup.

Specifications

Tuner Section: FM/AM with 30 presets.
Cassette Section: Auto-reverse, Dolby B NR, metal tape compatible.
Amplifier: Max Power 50W x 4, RMS 22W x 4.
Frequency Response: 20Hz - 20kHz.
Signal-to-Noise Ratio: 72dB (Dolby On).
Power Requirement: 12V DC, negative ground.
Dimensions: DIN size (178mm x 50mm x 160mm).
Operating Temp: 0°C to 40°C (32°F to 104°F).

Controls and Settings

Front Panel: POWER/VOLUME knob, SOURCE (Tuner/Tape/Aux), BASS/TREBLE knobs, EJECT, CLOCK, FADER/BALANCE buttons.

Detachable Faceplate: Contains main controls; remove for security.

Tuner: Manual tuning with TUNE/SEEK; preset selection 1-6. Tape: PLAY, FF/REW, STOP/EJECT, Dolby NR switch. General: LOUDNESS on/off, FADER (front/rear), BALANCE (left/right). Setup: Clock setting, preset memory, fader/balance adjustment.

Connecting Devices

Antenna: Standard car antenna plug. Speakers: Up to four speakers. Auxiliary: RCA inputs for external audio (if equipped). CD Changer: Connect to changer control port.

Turn off unit and disconnect battery before connecting devices.
For CD changer: Use Sony CDX changer cable to control port.
For auxiliary input: Connect RCA cables to rear AUX IN jacks.
Select source via SOURCE button (TUNER, TAPE, AUX).

Tip: Use proper gauge speaker wire for best performance.

Playing Cassette Tapes

Supports standard Type I (normal) and Type IV (metal) tapes.

Insert cassette: Label side up, open edge toward right.
Play: Press PLAY; unit will auto-reverse at tape end.
Fast Forward/Rewind: Press FF or REW; press again to stop.
Dolby NR: Switch ON for tapes recorded with Dolby B.
Eject: Press STOP/EJECT to remove tape.
Program Search: Press FF/REW during play to skip tracks.
Tape Direction: Manual reverse by pressing REV button.

WARNING! Do not insert objects into cassette slot. Avoid exposed tapes near magnets.

Security Features

Detachable Faceplate: Remove when parked to deter theft. Security Code: Optional code can be set (see manual).

Care & Cleaning

Use soft, dry cloth for exterior. For tape heads: Use isopropyl alcohol and cotton swab periodically.

CAUTION! Do not use solvents or sprays. Keep faceplate away from extreme heat.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits. This device complies with part 15 of the FCC Rules. Copyright © Sony Corporation. For support, visit www.sony.com/electronics/support or contact 1-800-222-7669.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Blown fuse/wiring	Check vehicle fuse; verify power/ground connections.
Poor radio reception	Antenna connection	Ensure antenna plug is fully inserted; check antenna mast.
Cassette won't play	Dirty heads/tape	Clean tape heads with cleaning cassette; try different tape.
Sound from one speaker	Balance/Fader settings	Adjust BALANCE/FADER; check speaker wiring.
Faceplate not attaching	Dirt/alignment	Clean connectors on unit and faceplate; align properly.

Reset: Disconnect battery for 5 minutes to reset unit.

Service: 1-800-222-7669; www.sony.com/electronics/support