Sony XAV-E722 Car Stereo Manual

The Sony XAV-E722 is a 6.95-inch touchscreen multimedia receiver designed for in-car entertainment. It features Apple CarPlay and Android Auto compatibility, Bluetooth connectivity for hands-free calling and audio streaming, AM/FM tuner with RDS, USB input for media playback and device charging, rear camera input, customizable display settings, and steering wheel control compatibility. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: 6.95-inch capacitive touchscreen, main unit, wiring harness, remote control, mounting sleeve, user manual.

Installation

Unpack and inspect contents. Ensure vehicle is parked, ignition is off, and battery is disconnected.

1. Remove existing stereo: Use appropriate removal tools for your vehicle.
2. Connect wiring harness: Match wire colors (power, ground, speakers, illumination).
3. Connect antenna adapter: Plug into vehicle's antenna cable.
4. Mount the unit: Secure mounting sleeve, insert receiver, attach trim plate.
5. Reconnect battery and test functions before final assembly.

WARNING! Installation requires automotive electrical knowledge. Incorrect wiring may damage the unit or vehicle systems. Consult a professional if unsure.

First-Time Setup

Power on the unit; follow initial setup prompts on screen.

1. Language selection: Choose preferred language (default is ENGLISH).
2. Clock setting: Set time format (12h/24h) and current time.
3. Bluetooth pairing: Enable Bluetooth on your phone, search for "XAV-E722" and pair.
4. Radio presets: Scan and save favorite AM/FM stations.
5. Display settings: Adjust brightness, color theme, and screen timeout.

CAUTION! Do not operate touchscreen while driving. Make adjustments only when vehicle is safely parked.

Specifications

• Model: Sony XAV-E722
• Display: 6.95-inch TFT LCD, capacitive touch
• Resolution: 800 x 480 pixels (WVGA)
• Power Output: 55W x 4 channels (max), 20W x 4 (RMS)
• Frequency Response: 20Hz - 20kHz
• Bluetooth Version: 4.2
• Supported Audio Formats: MP3, WMA, AAC, FLAC, WAV
• USB Port: 5V/1.5A for charging and media
• Operating Voltage: 12V DC (negative ground)
• Dimensions: DIN size (178mm x 100mm faceplate)

Controls and Settings

Access settings via touchscreen menu or physical buttons. Physical Controls: POWER/VOLUME knob, HOME button, hardware BACK button.

Touchscreen Interface: Home screen with app icons, swipe gestures for menus, customizable shortcuts.

Audio Settings: Equalizer (Rock, Pop, Jazz, Custom), Bass/Mid/Treble, Loudness, Fader/Balance. Display Settings: Brightness, Wallpaper, Button Illumination Color, Screen Off Timer. Bluetooth Settings: Pair/Unpair devices, Call history, Phonebook access. System Settings: Language, Clock, Factory Reset, Firmware Update.

Connecting Devices

USB: Connect iPhone for CarPlay or Android for Android Auto. AUX: 3.5mm cable for external audio players. Bluetooth: Pair smartphones for hands-free and audio.

1. Ensure ignition is on (accessory mode) or engine is running.
2. Use certified cables for CarPlay/Android Auto connections.
3. For USB media, format storage device as FAT32 (max 64GB recommended).
4. Select source via touchscreen (USB, BT AUDIO, AUX, RADIO).

Tip: For optimal CarPlay/Android Auto performance, use original or MFi-certified cables.

Using Apple CarPlay & Android Auto

Requires compatible iPhone (iOS 9.3+) or Android phone (5.0+).

1. Connect phone via USB cable to the unit's USB port.
2. On phone, allow connection when prompted (trust this computer for iPhone).
3. CarPlay/Android Auto interface will launch automatically on the screen.
4. Use voice commands (Siri or Google Assistant) or touchscreen to navigate.
5. Supported apps: Maps, Phone, Messages, Music, Podcasts, and compatible third-party apps.
6. To exit, disconnect USB cable or press HOME button on unit.

WARNING! Do not interact with smartphone interfaces while driving. Use voice commands or pull over safely.

Bluetooth Connectivity

Pair up to 5 devices. Supports hands-free calling and audio streaming.

1. Turn on Bluetooth on your phone.
2. On unit, go to Settings > Bluetooth > Pair New Device.
3. Select "XAV-E722" from your phone's Bluetooth list.
4. Enter PIN if prompted (default is 0000).
5. For calls: Use on-screen dialer, call history, or voice commands.
6. For music: Select BT AUDIO source, control playback from unit or phone.

Note: Some phone models may not support full contact list transfer. Consult phone manufacturer for compatibility.

Care & Maintenance

Turn off unit and disconnect battery before cleaning. Use microfiber cloth lightly dampened with water. Do not use chemical cleaners, ammonia, or abrasive materials on the screen.

CAUTION! Avoid extreme temperatures. Do not expose unit to direct sunlight for prolonged periods. Keep liquids away from the unit.

Regulatory Information

FCC ID: AK8XAVE722 (Complies with Part 15 of FCC Rules). IC: 6317A-XAVE722 (Complies with Industry Canada license-exempt RSS standard(s)). This device complies with Bluetooth SIG standards. Copyright © Sony Corporation. For support, visit www.sony.com/electronics/support or contact Sony Customer Service at 1-800-222-7669.

Troubleshooting

Reset: Settings > System > Factory Reset (will erase all custom settings).

Service: 1-800-222-7669; www.sony.com/electronics/support