Sony XR-4950X Car Stereo Manual

The Sony XR-4950X is a high-performance in-dash car stereo featuring a 6.8-inch touchscreen display, Apple CarPlay and Android Auto integration, Bluetooth connectivity for hands-free calling and audio streaming, AM/FM tuner with RDS, USB port for media playback and device charging, auxiliary input, 4x55W high-power output, customizable EQ settings, steering wheel control compatibility, and a detachable faceplate for security. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: 6.8-inch capacitive touchscreen, Remote Control, USB port, AUX-IN jack, Microphone input, RCA preamp outputs.

Installation

Unpack and inspect contents. Ensure vehicle battery is disconnected before installation.

1. Remove existing stereo: Use appropriate removal tools for your vehicle.
2. Connect wiring harness: Match colors of the supplied harness to your vehicle's wiring (power, ground, speakers).
3. Connect antenna: Plug vehicle antenna cable into the rear antenna port.
4. Mount the unit: Secure the stereo into the dashboard using the provided sleeve and brackets.
5. Reconnect vehicle battery and test functions.

WARNING! Disconnect negative battery terminal before installation to prevent electrical shorts or damage. Ensure all connections are secure and insulated.

First-Time Setup

Power on the stereo; follow on-screen prompts for initial configuration.

1. Language Selection: Choose your preferred language from the SETTINGS menu.
2. Pair Bluetooth: Go to Bluetooth settings, search for "XR-4950X" from your phone, and enter the PIN if required.
3. Set Radio Presets: Tune to desired stations and press and hold a preset button (1-6) to save.
4. Configure Sound: Access AUDIO settings to adjust EQ, balance, fader, and loudness.
5. Set Clock: Adjust time and date in the SYSTEM settings.

CAUTION! Do not operate the touchscreen while driving. Perform setup when the vehicle is parked.

Specifications

• Display: 6.8-inch TFT LCD capacitive touchscreen.
• Radio: AM/FM tuner with 30 station presets (18 FM, 12 AM).
• Audio Output: 4 x 55W MAX (20W RMS).
• Connectivity: Bluetooth 5.0, USB 2.0, 3.5mm AUX-IN.
• Smartphone Integration: Apple CarPlay (wired), Android Auto (wired).
• Preamp Outputs: 3 pairs (Front, Rear, Subwoofer) - 2V pre-out level.
• Power Supply: 12V DC, negative ground.
• Operating Temperature: -20°C to 60°C (-4°F to 140°F).
• Dimensions (DIN): 178mm x 100mm x 165mm (W x H x D).

Controls and Settings

Access menus via touchscreen or physical buttons. Front Panel: POWER/VOLUME knob, SRC (Source), HOME, physical shortcut buttons.

Remote: POWER, Numeric buttons, SRC, VOLUME UP/DOWN, MUTE, PLAY/PAUSE, NAVI, MENU.

Audio Settings: 13-band equalizer, Bass Boost, Loudness, Balance/Fader. Source Settings: Bluetooth pairing, USB mode, AUX detection. System Settings: Display brightness, button illumination color, clock, language, reset. Phone Settings: Call history, contacts sync, voice command setup.

Connecting Devices

USB: Connect flash drive or smartphone for media/charging. AUX: 3.5mm cable from external player. Bluetooth: Pair for wireless audio/calls.

1. Turn on the stereo and ensure vehicle ignition is in ACC or ON position.
2. For USB: Insert USB drive into port; select USB source on screen.
3. For AUX: Connect cable to AUX-IN jack and external device; select AUX source.
4. For Bluetooth: Enable pairing mode in settings, search from phone.

Tip: Use high-quality USB drives formatted to FAT32 for best compatibility.

Playing Media

Supports MP3, WMA, AAC, FLAC, WAV audio files; playback from USB, Bluetooth, or AUX.

1. Select Source: Press SRC or touch source icon (USB, BT, AUX, RADIO).
2. Navigate Files: Use folder/track browsing on touchscreen.
3. Playback Control: PLAY/PAUSE, SKIP (NEXT/PREV), fast forward/rewind by holding.
4. Repeat/Shuffle: Touch REPEAT or SHUFFLE icons on playback screen.
5. Sound Adjustment: Access AUDIO menu to change EQ settings per source.

WARNING! Do not remove USB drive during playback. Eject via menu option first to avoid data corruption.

Smartphone Integration

Apple CarPlay/Android Auto: Connect compatible smartphone via USB cable. The stereo screen mirrors approved apps for navigation, music, messaging, and voice commands.

1. Enable smartphone's CarPlay or Android Auto feature.
2. Use supplied USB cable to connect phone to stereo's USB port.
3. Follow on-screen prompts on stereo and phone to grant permissions.
4. Use voice command button on steering wheel or touchscreen for Siri/Google Assistant.

Note: Some functions may be limited while vehicle is in motion for safety.

Care & Maintenance

Use a soft, dry microfiber cloth to clean the touchscreen. For stubborn smudges, lightly dampen cloth with water only. Do not use alcohol, solvents, or abrasive cleaners.

CAUTION! Detach faceplate when leaving vehicle unattended for long periods. Store faceplate in protective case away from extreme temperatures.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for vehicular use. ICES-003: Complies with Canadian EMI regulations. This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Copyright © Sony Corporation. For support, visit www.sony.com/electronics/support or contact 1-800-222-7669.

Troubleshooting

Reset: Settings > System > Factory Reset (will erase all presets and pairings).

Service: 1-800-222-7669; www.sony.com/electronics/support