Sony XR-C113 Car Stereo Manual

The Sony XR-C113 is a single-DIN car stereo receiver featuring AM/FM radio, CD playback, USB connectivity for audio files, auxiliary input, 52W x 4 high power output, detachable faceplate security, preset EQ settings, and a customizable illumination color. Designed for easy installation in most vehicles, it provides clear sound and user-friendly controls for an enhanced in-car entertainment experience. Below are key sections covering features, installation, operation, settings, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Playing Media 8. Security Features 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Main unit with CD slot, detachable faceplate, Remote Control (if included), rear connection panel, and wiring harness.

Feature	Description
AM/FM Tuner	30 station presets (18 FM, 12 AM) with seek/scan
CD Player	Plays audio CDs, CD-R/RW
USB Port	Front-panel USB for MP3/WMA playback from flash drives
Auxiliary Input	3.5mm front AUX-IN for external audio devices
Power Output	52W x 4 channels max (typically 17W RMS x 4)
EQ & Sound	Preset EQ (Rock, Pop, Jazz, etc.) and bass/treble controls
Illumination	Selectable button/display color (green/red/amber)
Security	Detachable faceplate to deter theft
Clock	Digital clock display
Power Requirements	12V DC, negative ground vehicles

Installation

Unpack and verify contents. Ensure vehicle is off and battery disconnected before starting.

Remove existing stereo: Use removal keys or tools to slide out old unit.
Connect wiring harness: Match colors (red=ignition, yellow=constant 12V, black=ground, etc.). Use crimp connectors or solder.
Connect antenna plug: Push coaxial antenna cable into rear antenna port.
Secure unit: Slide stereo into dash sleeve and secure with bent tabs or screws.
Reconnect battery and test: Turn on ignition to verify power and basic functions.

WARNING! Incorrect wiring can damage the unit or vehicle electrical system. Follow wiring diagram precisely.

First-Time Setup

After installation, configure initial settings.

Set the clock: Press and hold CLOCK button, use tuning knob or preset buttons to set time.
Program radio presets: Tune to desired station, press and hold a preset button (1-6) to store.
Adjust illumination: Press DIMMER or COLOR button to cycle through color options.
Set audio preferences: Use EQ button to select preset (Rock, Pop, etc.) or customize via menu.

CAUTION! Ensure faceplate is securely attached during operation. Detach only when leaving vehicle unattended.

Specifications

Chassis Size: Single DIN (178mm x 50mm).
Tuner: FM 87.5-108 MHz, AM 530-1710 kHz.
Audio Output: 52W x 4 max (17W RMS x 4 at 4 ohms).
Supported Media: Audio CD, CD-R, CD-RW, USB flash drives (MP3/WMA).
Frequency Response: 20Hz-20kHz.
Signal-to-Noise Ratio: >80 dB (CD).
Power Supply: 12V DC (negative ground).
Operating Temperature: 0°C to 40°C (32°F to 104°F).

Controls and Settings

Front Panel: POWER/VOLUME knob, SOURCE button, BAND, TUNE/TRACK knobs, AUX/USB port, detachable faceplate release.

Remote (if included): POWER, VOLUME, SOURCE, PRESET, MUTE, PLAY/PAUSE, etc.

Audio Settings: BASS, TREBLE, BALANCE, FADER, LOUDNESS (On/Off). EQ Presets: ROCK, POP, JAZZ, CUSTOM. Display: Adjust brightness/dimmer, select illumination color. Radio: Manual/seek tuning, local/distance reception setting. Clock: Set time (12/24 hour format).

Connecting Devices

USB: Insert flash drive into front USB port. AUX: Connect 3.5mm cable from device to AUX-IN.

Ensure unit is on and in correct source mode (USB or AUX).
For USB, ensure files are in supported format (MP3/WMA) and folder structure is simple.
For AUX, adjust external device volume to mid-level to avoid distortion.

Tip: Use high-quality USB drives formatted to FAT32 for best compatibility.

Playing Media

Supports CD, USB, AUX, and radio playback.

CD: Insert disc label-side up. Playback starts automatically or press PLAY.
USB: Insert drive, press SOURCE until USB mode appears. Use TUNE knob to browse folders/tracks.
AUX: Connect cable, select AUX source. Control playback from external device.
Radio: Press BAND to switch AM/FM. Use SEEK or manual TUNE to find stations.
Skip Tracks: Press >> or << on CD/USB.
Repeat/Random: Press RPT or RDM during playback (if supported).
Mute: Press MUTE button temporarily silences audio.

WARNING! Do not insert damaged or irregular-shaped discs. Avoid using USB drives with multiple partitions.

Security Features

Detachable Faceplate: Press release button, slide faceplate off. Store separately when leaving vehicle. Code Security (if equipped): Set PIN via menu to disable unit if power is lost.

Care & Maintenance

Clean faceplate with soft, dry cloth. Do not use solvents or abrasive cleaners. Keep CDs and USB ports free of dust and moisture.

CAUTION! Never insert objects into CD slot or USB port. Avoid extreme temperatures.

Regulatory Information

FCC Part 15 Compliance: This device complies with Class B digital device limits. Any changes not approved by Sony may void user authority to operate. Copyright © Sony Corporation. For support, visit www.sony.com/electronics/support or contact Sony customer service at 1-800-222-7669.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Blown fuse, wiring	Check vehicle fuse (usually 10A-15A); verify wiring connections (red/yellow/black).
Radio poor reception	Antenna connection	Ensure antenna cable is fully inserted; check antenna mast condition.
CD/USB not reading	Disc/drive format	Clean disc; ensure USB is FAT32 and files are MP3/WMA; try another disc/drive.
No sound from speakers	Speaker wires, fade/balance	Check speaker connections; adjust FADER/BALANCE to center; ensure source is playing.
Unit resets settings	Constant 12V loss	Verify yellow wire has constant battery voltage; check connections.

Reset: Disconnect battery for 5 minutes to reset unit memory (note: may lose presets).

Service: 1-800-222-7669; www.sony.com/electronics/support