Sony XR-C2200 Car Stereo Manual

The Sony XR-C2200 is a single-DIN car stereo featuring AM/FM radio, CD playback, USB and AUX inputs, Bluetooth connectivity for hands-free calling and audio streaming, 4x50W max power output, customizable EQ settings, and a detachable faceplate for security. Below are key sections covering safety, features, installation, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Playing Media 8. Bluetooth Features 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Main unit with detachable faceplate, Remote Control (if included), Wiring harness, Antenna connector, USB port, AUX-IN jack, Microphone input for Bluetooth.

FeatureDescription
AM/FM TunerPresets for 18 FM and 6 AM stations
CD PlayerPlays CD, CD-R, CD-RW formats
USB PortFor USB flash drives and iPod/iPhone connectivity
AUX Input3.5mm jack for external audio devices
BluetoothHands-free calling and audio streaming (A2DP)
Power Output4 x 50W max (4 x 17W RMS)
EQ PresetsRock, Pop, Jazz, Custom, etc.
Detachable FaceplateSecurity feature to prevent theft
IlluminationAdjustable button illumination color
Remote ControlOptional wired or infrared remote

Installation

Ensure vehicle is parked, ignition off, and battery disconnected before installation.

  1. Remove existing stereo: Use DIN tools to release and pull out old unit.
  2. Connect wiring harness: Match colors (Red: ignition, Yellow: constant 12V, Black: ground, etc.). Solder or use crimp connectors.
  3. Connect antenna plug and other inputs (USB extension, microphone).
  4. Slide unit into dash and secure with mounting sleeve.
  5. Reconnect vehicle battery, turn on ignition to test.

WARNING! Incorrect wiring can cause damage or fire. Consult vehicle wiring diagram if unsure.

First-Time Setup

After installation, configure basic settings.

  1. Attach faceplate: Slide onto main unit until it clicks.
  2. Power on: Press SRC or POWER button.
  3. Set clock: Press and hold SETUP, navigate to Clock setting.
  4. Pair Bluetooth: Go to Bluetooth menu, select "Pairing", search from phone.
  5. Program radio presets: Tune to station, press and hold a preset button (1-6).

CAUTION! Do not operate settings while driving. Park safely first.

Specifications

Controls and Settings

Front Panel: SRC (source), VOL knob, EJECT, BAND, MENU/SETUP, numeric buttons.

Remote (if applicable): Power, Volume, Track skip, Preset, Mute.

Audio Settings: Press SETUP to access Bass, Treble, Balance, Fader, Loudness, EQ presets. Radio: Auto Store, Local/DX tuning. System: Clock, Beep, Illumination color (Red/Green/Blue), Reset. Bluetooth: Pairing list, Call settings, Audio priority.

Connecting Devices

USB: Connect flash drive or iPod to USB port (use extension cable if needed). AUX: 3.5mm cable from device to AUX-IN. Microphone: Plug into MIC jack for Bluetooth calls (mount on sun visor).

  1. Ensure stereo is on and in correct source mode (USB, AUX, BT).
  2. For iPod, some control (play/pause, skip) may be available via stereo buttons.
  3. For USB, format as FAT32 for best compatibility.

Tip: Use high-quality cables to minimize noise interference.

Playing Media

Supports CD, USB, AUX, Bluetooth audio.

  1. CD: Insert disc (label up), playback starts automatically or press PLAY.
  2. USB: Insert drive, press SRC to select USB mode.
  3. AUX: Connect cable, select AUX source.
  4. Navigate: Use >>| and |<< for next/previous track.
  5. Scan: Press and hold >>| or |<< to scan through tracks.
  6. Repeat/Random: Press RPT or RDM during playback.
  7. Folder navigation (USB): Use < and > buttons to skip folders.

WARNING! Do not insert damaged or irregular-shaped discs. Avoid extreme heat with CDs left in car.

Bluetooth Features

Hands-free calling and wireless audio streaming.

  1. Pairing: Enable BT on phone, search for "XR-C2200", enter PIN 0000 if prompted.
  2. Calling: Use phonebook access, recent calls, dial via phone. Microphone picks up voice.
  3. Audio Streaming: Select BT Audio mode, play music from phone app.
  4. Disconnect: Turn off BT on phone or select "Disconnect" in stereo menu.

Note: Compatibility varies by phone. Consult phone manual for BT details.

Care & Maintenance

Use soft, dry cloth for cleaning faceplate and buttons. Do not use solvents. Remove faceplate when parking in high-risk areas. Keep discs and USB drives away from direct sunlight.

CAUTION! Do not disassemble unit. No user-serviceable parts inside.

Regulatory Information

FCC ID: AK8XR-C2200. This device complies with Part 15 of FCC Rules. Operation subject to conditions: (1) not cause harmful interference, (2) accept any interference received. Bluetooth is a trademark of Bluetooth SIG, Inc. Sony and the Sony logo are trademarks of Sony Corporation. For support, visit www.sony.com/electronics/support or contact 1-800-222-7669.

Troubleshooting

SymptomPossible CauseCorrective Action
No powerBlown fuse, wiringCheck vehicle fuse (usually 10A). Verify constant and ignition wires have 12V.
No sound from speakersSpeaker wires, fade/balanceCheck speaker connections. Ensure fade/balance not set to extreme.
Bluetooth not connectingPairing mode, distanceEnter pairing mode on stereo. Ensure phone within range (3 ft during pairing).
CD/USB not readingDisc/drive formatClean disc. Reformat USB as FAT32. Check for supported file types (MP3, WMA).
Poor radio receptionAntenna connectionEnsure antenna plug fully inserted. Check antenna mast for damage.

Reset: Press and hold SETUP while turning on power to restore factory defaults (except BT pairings).

Service: 1-800-222-7669; www.sony.com/electronics/support

Sony XR-C2200 Car Stereo Manual © - All Rights Reserved 2025