Sony XTC-U200 Car Stereo Manual

The Sony XTC-U200 is an in-dash car stereo receiver featuring AM/FM radio, CD playback, USB and auxiliary inputs, Bluetooth connectivity for hands-free calling and audio streaming, a detachable faceplate for security, and a customizable illumination system. It delivers 50W x 4 high power output, includes a built-in MOSFET amplifier, and supports steering wheel control integration. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Playing Media 8. Bluetooth Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Main unit with detachable faceplate, Remote Control, Wiring harness, USB extension cable, Mounting sleeve, User manual.

Feature	Description
AM/FM Tuner	30 station presets (18 FM, 12 AM) with RDS (Radio Data System)
CD Player	Plays CD, CD-R, CD-RW, MP3, WMA
USB Port	For USB flash drives and iPod/iPhone connectivity
Auxiliary Input	3.5mm jack for external audio devices
Bluetooth	Wireless audio streaming and hands-free phone calls
Power Output	50W x 4 (MOSFET amplifier)
Detachable Faceplate	Security feature to prevent theft
Customizable Illumination	Adjustable display color to match vehicle interior
Steering Wheel Control Ready	Compatible with optional interface adapters
Audio Controls	Bass, Treble, Balance, Fader, Loudness, EQ presets

Installation

Unpack and inspect contents. Ensure vehicle battery is disconnected before installation.

Remove existing stereo: Use vehicle-specific removal tools to detach the old unit.
Connect wiring harness: Match wire colors (red-ignition, yellow-battery, black-ground, speaker wires). Use crimp connectors or solder for secure connections.
Connect antenna: Plug the vehicle antenna cable into the rear antenna port.
Mount the unit: Slide the mounting sleeve into the dashboard, then secure the main unit.
Reconnect battery and test functions before final assembly.

WARNING! Disconnect the negative battery terminal before installation to prevent electrical shorts or damage. Ensure all connections are secure and insulated.

First-Time Setup

Reconnect vehicle battery and power on the stereo.

Set the clock: Press and hold the SETUP button, navigate to CLOCK settings.
Program radio stations: Tune to desired station, press and hold a preset button (1-6) to store.
Pair Bluetooth device: Navigate to Bluetooth menu, select "Pairing", search for "Sony XTC-U200" on your phone.
Adjust audio settings: Use the AUDIO menu to set bass, treble, balance, and fader to your preference.
Customize illumination: In SETUP menu, select DISPLAY to choose from multiple color options.

CAUTION! Do not operate the unit while driving. Perform initial setup with the vehicle parked.

Specifications

Power Output: 50W x 4 (Max), 17W x 4 (RMS).
Tuner: FM/AM with RDS.
CD Playback: CD, CD-R/RW, MP3, WMA.
USB: Supports USB mass storage class devices, iPod/iPhone control and charging.
Bluetooth: Version 2.1 + EDR, profiles: A2DP, AVRCP, HFP.
Audio Input: 3.5mm AUX jack.
Preamp Outputs: 1 pair (Front/Rear) for external amplifier.
Illumination: Customizable 13-color display.
Power Supply: 12V DC, negative ground.
Dimensions: DIN size (178mm x 50mm).

Controls and Settings

Access menus via the SETUP button or directly from the front panel. Front Panel: POWER/VOLUME knob, SOURCE, BAND, AUDIO, MENU, EJECT, Number buttons.

Remote: POWER, VOLUME, MUTE, SOURCE, TRACK UP/DOWN, PRESET UP/DOWN, NUMBER PADS.

Audio Settings: BASS, TREBLE, BALANCE, FADER, LOUDNESS (On/Off), EQ presets (ROCK, POP, JAZZ, etc.). Setup: Clock setting, Display color, Beep tone, Bluetooth settings, Language. Radio: Manual/Seek tuning, Preset memory (6 presets per band). CD/USB: Repeat, Random, Scan playback modes.

Connecting Devices

USB: Connect flash drive or iPod/iPhone via USB extension cable. AUX: Use 3.5mm audio cable for external players. Bluetooth: Pair compatible phone or audio device.

Turn off the stereo before connecting wired devices.
For USB: Insert the USB device into the port on the front panel or extension cable.
For AUX: Plug the 3.5mm cable into the AUX IN jack on the front panel.
Select the corresponding source (USB, AUX, BT AUDIO) using the SOURCE button.

Tip: For best Bluetooth performance, keep paired device within 3 feet (1 meter) during initial pairing.

Playing Media

Supports CD, USB, AUX, and Bluetooth audio sources.

Insert CD: Press EJECT, load disc label-side up, press EJECT again to close.
Play: Press PLAY/PAUSE; skip tracks with TRACK UP/DOWN buttons.
USB Playback: Navigate folders using the NUMBER buttons or MENU.
Repeat/Random: Press the RPT or RDM button during playback to activate modes.
Fast Forward/Rewind: Press and hold TRACK UP/DOWN buttons.
Bluetooth Audio: Select BT AUDIO source, control playback from stereo or connected device.
Detach Faceplate: Press the RELEASE button and pull faceplate straight out for security.

WARNING! Do not insert damaged or irregularly shaped discs. Do not touch the laser lens. Remove faceplate when leaving vehicle unattended.

Bluetooth Features

Hands-free Calling: Answer/end calls with the PHONE button; use microphone (included) for voice communication. Audio Streaming: Stream music from compatible devices. Phonebook Access: Sync contacts for voice dialing (depending on phone compatibility).

Care & Cleaning

Disconnect power before cleaning. Use a soft, dry cloth for the faceplate and unit. For stubborn dirt, dampen cloth slightly with water. Do not use solvents or abrasive cleaners.

CAUTION! Never spray cleaning agents directly onto the unit. Avoid getting moisture into openings. Store detached faceplate in the provided protective case.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits. This device complies with Industry Canada licence-exempt RSS standard(s). Bluetooth is a trademark of Bluetooth SIG, Inc. Sony and the Sony logo are trademarks of Sony Corporation. For support, visit www.sony.com/auto or contact Sony customer service at 1-800-222-7669.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Wiring/ fuse	Check connections (red/yellow/black wires); verify vehicle fuse for radio circuit.
No sound from speakers	Speaker wiring/ settings	Verify speaker wire connections; check balance/fader settings; ensure mute is off.
Bluetooth not connecting	Pairing mode/ distance	Ensure stereo is in pairing mode; delete old pairing from phone and retry; reduce distance.
CD/USB not recognized	Format/ disc damage	Ensure disc is clean and not scratched; USB must be FAT16/32 format; try another device.
Poor radio reception	Antenna connection	Ensure antenna cable is fully inserted; check antenna for damage; retune station.

Reset: Press and hold the SETUP button for 5 seconds, select "Factory Reset".

Service: 1-800-222-7669; www.sony.com/auto